Spotpilot logotype

Solinteg MHT

Modbus TCP is enabled by default on the Solinteg MHT, so no additional configuration is needed.

  1. 1

    To be able to connect wirelessly you need version 2 of the dongle (see example below). For the older version of the dongle, you need to connect the inverter to the network via a network cable.

    To be able to connect wirelessly you need version 2 of the dongle (see example below). For the older version of the dongle, you need to connect the inverter to the network via a network cable.
Back to inverter guides