Specifications
Spotpilot is a smart home product that uses powerful optimization algorithms to control your home batteries and reduce your electricity costs.
By continuously analyzing the electricity market's spot prices, your energy consumption, expected solar energy production, and weather conditions, Spotpilot ensures that your batteries are used as efficiently as possible. In short, Spotpilot charges the battery when electricity is cheap and uses stored energy when it is expensive.
Supported inverters
| Fronius GEN24 Plus & Verto Plus |
| Huawei SUN2000 |
| GoodWe ET ¹ |
We are currently focused on bringing support for more inverters to Spotpilot. Subscribe to our newsletter to find out when your inverter make has been integrated.
¹ It is important which dongle you have connected to your GoodWe ET inverter. Their older dongles stop syncing with the SEMS portal when Spotpilot communicates with it. Therefore, we recommend using the GoodWe Wi-Fi/LAN Kit 2.0, which does not have that issue.
Size and weight
| Dimensions | Height | 35 mm |
| Width | 70 mm | |
| Length | 70 mm | |
| Weight | Device | 195 g |
| + cables and packaging | 424 g |
Hardware
| Ports, buttons and indicators | Power | USB-C |
| Network | RJ 45 | |
| Status LED | Red, yellow, green | |
| Pin-hole button | For reset procedure |
Power supply
| Color | Black | |
| Input | Type | AC |
| Voltage | 100-240 V | |
| Frequency | 50 Hz | |
| Output | Voltage | 5.1 V |
| Current | 3 A |
Network cable
| Color | Black | |
| Category | Cat 5e | |
| Speed | 1 Gbit/s |
WiFi**
| Standard | 802.11 b/g/n/ac | |
| Frequencies | 2.4 GHz, 5.0 GHz | |
| Speed | 433 Mbit/s |
Bluetooth***
| Standard | 5.0 BLE |
* Preliminary figure
** Wi-Fi is supported by the hardware. Software support is coming in a later software release.
*** Bluetooth is supported in hardware, software support will come later to help with Wi-Fi setup.